السلام عليكم
Materials Transactions Journal, Vol. 50, No.1, January 2009
Materials Transactions Journal, Vol. 50, No.1, January 2009
The Japan Institute of Metals | English | Pages: 228 | PDF | 7.11 MB
Materials Transactions, Vol.50 No.1 (2009) 1-1 : PREFACE
Tadanobu Inoue, Yoshikazu Todaka and Zenji Horita2-10 : Effect of Extrinsic Grain Boundary Dislocations on Mechanical Properties of Ultrafine-Grained Metals by Molecular Dynamics Simulations
Tomotsugu Shimokawa, Tomoyuki Hiramoto, Toshiyasu Kinari and Sukenori Shintaku11-18 : First-Principles Study of the Stability and Interfacial Bonding of Tilt and Twist Grain Boundaries in Al and Cu
Ru-Zhi Wang, Masanori Kohyama, Shingo Tanaka, Tomoyuki Tamura and Shoji Ishibashi19-26 : SPH Analysis of ECAP Process by Using Grain Refinement Model
Ken-ichi Saitoh and Yuuki Ohnishi27-33 : Distributions of Hardness and Strain during Compression in Pure Aluminum Processed with Equal-Channel Angular Pressing and Subsequent Annealing
Tadanobu Inoue, Zenji Horita, Hidetoshi Somekawa and Fuxing Yin34-39 : Effect of Strain on Microstructural Evolution under Warm Deformation in an Ultra-Low Carbon Steel
Joo-Hee Kang, Tadanobu Inoue and Shiro Torizuka40-43 : Coupled Analysis of Heat Transfer and Deformation in Equal Channel Angular Pressing of Al and Steel
Pham Quang, A. Krishnaiah, Sun Ig Hong and Hyoung Seop Kim44-50 : Evolution of Mechanical Properties and Microstructures with Equivalent Strain in Pure Fe Processed by High Pressure Torsion
Kaveh Edalati, Tadayoshi Fujioka and Zenji Horita51-55 : High Tensile Strength of Low-Carbon Ferritic Steel Subjected to Severe Drawing
Tetsuya Suzuki, Yo Tomota, Atsushi Moriai and Hitoshi Tashiro56-63 : Brittle-Ductile Transition in Low Carbon Steel Deformed by the Accumulative Roll Bonding Process
Masaki Tanaka, Kenji Higashida, Tomotsugu Shimokawa and Tatsuya Morikawa64-69 : Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding
Takahiro Kunimine, Naoki Takata, Nobuhiro Tsuji, Toshiyuki Fujii, Masaharu Kato and Susumu Onaka70-75 : Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing
Yoji Furukawa, Toshiyuki Fujii, Susumu Onaka and Masaharu Kato76-81 : Fabrication and Characterization of Supersaturated Al-Mg Alloys by Severe Plastic Deformation and Their Mechanical Properties
Kenji Kaneko, Tetsuro Hata, Tomoharu Tokunaga and Zenji Horita82-86 : The Evolution of Microstructure and Mechanical Properties of a 5052 Aluminium Alloy by the Application of Cryogenic Rolling and Warm Rolling
Ui Gu Gang, Sang Hun Lee and Won Jong Nam87-91 : Grain Refinement and Mechanical Behavior of the Al Alloy, Subjected to the New SPD Technique
Ruslan Z. Valiev, Maxim Yu. Murashkin, Elena V. Bobruk and Georgy I. Raab92-95 : Scaling-Up of High Pressure Torsion Using Ring Shape
Kaveh Edalati and Zenji Horita96-100 : Microstructure Evolution in Pure Al Processed with Twist Extrusion
Dmitry Orlov, Yan Beygelzimer, Sergey Synkov, Viktor Varyukhin, Nobuhiro Tsuji and Zenji Horita101-110 : Partial Grain Refinement in Al-3%Cu Alloy during ECAP at Elevated Temperatures
Inna Mazurina, Taku Sakai, Hiromi Miura, Oleg Sitdikov and Rustam Kaibyshev111-116 : Achieving Microstructural Refinement in Magnesium Alloys through Severe Plastic Deformation
Roberto B. Figueiredo and Terence G. Langdon117-122 : Microstructural Evolution of Ti-Mo-Ni-C Powder by Mechanical Alloying
Hiroyuki Hosokawa, Kiyotaka Kato, Koji Shimojima and Akihiro Matsumoto123-129 : Kinetics and Morphology of Isothermal Transformations at Intermediate Temperature in 15CrMnMoV Steel
Mokuang Kang, Ming-Xing Zhang, Feng Liu and Ming Zhu130-137 : Solid-State Reactive Diffusion between Sn and Electroless Ni–P at 473 K
Masafumi Yamakami and Masanori Kajihara138-144 : Determination of True Stress–Strain Curves of Sheet Metals in Post-Uniform Elongation Range
Kenichi Hasegawa, Zhong-Chun Chen, Keiou Nishimura and Keisuke Ikeda145-151 : Weibull Statistics for Evaluating Failure Behaviors and Joining Reliability of Friction Stir Spot Welded 5052 Aluminum Alloy
Chung-Wei Yang, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Jiun-Yu Juo152-157 : Geometry Constrained Plasticity of Bulk Metallic Glass
K. Mondal and K. Hono158-160 : Residual Stress Relaxation in Shot Peened Surface Layer on TiB2/Al Composite under Applied Loading
Weizhi Luan, Chuanhai Jiang and Vincent Ji161-166 : Finite Element Simulation with Coupled Thermo-Mechanical Analysis of Superplastic Dieless Tube Drawing Considering Strain Rate Sensitivity
Tsuyoshi Furushima and Ken-ichi Manabe167-170 : Fine Measurement of Thermal Conductivity for (Bi0.5Sb1.5)Te3 Compounds
Takashi Hamachiyo, Maki Ashida and Kazuhiro Hasezaki171-176 : Removal of Trace Impurity from Limestone Using Flotation Techniques
Masami Tsunekawa, Yugo Honma, Kyoungkeun Yoo, Naoki Hiroyoshi and Mayumi Ito177-181 : Effects of Water Absorption on Impact Value of Aluminum Dispersed Composite Nylon6
Masae Kanda and Yoshitake Nishi182-186 : Direct Dry Syntheses and Thermal Analyses of a Series of Aluminum Complex Hydrides
T. Sato, K. Ikeda, H.-W. Li, H. Yukawa, M. Morinaga and S. Orimo187-191 : Synthesis of Ultra Fine Titanium-Tungsten Carbide Powder from Titanium Dioxide and Ammonium Metatungstate
Gil-Geun Lee and Gook-Hyun Ha192-196 : Surface Modification of Porous Metals Using Friction Phenomena
Yong-Jai Kwon, Ichinori Shigematsu and Naobumi Saito197-203 : Dissimilar Friction Stir Welding for Tailor-Welded Blanks of Aluminum and Magnesium Alloys
Ichinori Shigematsu, Yong-Jai Kwon and Naobumi Saito204-209 : FeSiBPCu Nanocrystalline Soft Magnetic Alloys with High Bs of 1.9 Tesla Produced by Crystallizing Hetero-Amorphous Phase
Akihiro Makino, He Men, Takeshi Kubota, Kunio Yubuta and Akihisa Inoue210-214 : Microstructure Refinement and Texture Evolution of Titanium by Friction Roll Surface Processing
Meiqin Shi, Yoshimasa Takayama, Tomohiro Umetsu, Hajime Kato, Hideo Watanabe and Hirofumi Inoue215-218 : Deoxidation Thermodynamics of β-Titanium by Ca-CaCl2 and Ca-CaF2 Fluxes
Seung-Min Han, Young-Seok Lee, Joo-Hyun Park, Good-Sun Choi and Dong-Joon Min219-221 : The Synthesis of Graded Thermal Barrier Coatings on Nickel Substrates by Laser Induced Thermite Reactions
T. M. Yue, H. O. Yang, T. Li and K. J. Huang222-225 : Stabilization of Stacking Faults and a Long Period Stacking Phase Dispersed in α-Mg Crystalline Grains of Mg-0.7 at%Zn-1.4 at%Y Alloy
Jongbeom Lee, Kazuhisa Sato, Toyohiko J. Konno and Kenji Hiraga226-228 : Direct Bonding to Aluminum with Silver-Oxide Microparticles
Toshiaki Morita, Yusuke Yasuda, Eiichi Ide and Akio Hirose
حمل من
http://uploading.com/files/6NO6YSNZ/cv08.rar.html
=========
http://rapidshare.com/files/256916766/cv08.rar
Materials Transactions Journal, Vol. 50, No.1, January 2009
Materials Transactions Journal, Vol. 50, No.1, January 2009
The Japan Institute of Metals | English | Pages: 228 | PDF | 7.11 MB
Materials Transactions, Vol.50 No.1 (2009) 1-1 : PREFACE
Tadanobu Inoue, Yoshikazu Todaka and Zenji Horita2-10 : Effect of Extrinsic Grain Boundary Dislocations on Mechanical Properties of Ultrafine-Grained Metals by Molecular Dynamics Simulations
Tomotsugu Shimokawa, Tomoyuki Hiramoto, Toshiyasu Kinari and Sukenori Shintaku11-18 : First-Principles Study of the Stability and Interfacial Bonding of Tilt and Twist Grain Boundaries in Al and Cu
Ru-Zhi Wang, Masanori Kohyama, Shingo Tanaka, Tomoyuki Tamura and Shoji Ishibashi19-26 : SPH Analysis of ECAP Process by Using Grain Refinement Model
Ken-ichi Saitoh and Yuuki Ohnishi27-33 : Distributions of Hardness and Strain during Compression in Pure Aluminum Processed with Equal-Channel Angular Pressing and Subsequent Annealing
Tadanobu Inoue, Zenji Horita, Hidetoshi Somekawa and Fuxing Yin34-39 : Effect of Strain on Microstructural Evolution under Warm Deformation in an Ultra-Low Carbon Steel
Joo-Hee Kang, Tadanobu Inoue and Shiro Torizuka40-43 : Coupled Analysis of Heat Transfer and Deformation in Equal Channel Angular Pressing of Al and Steel
Pham Quang, A. Krishnaiah, Sun Ig Hong and Hyoung Seop Kim44-50 : Evolution of Mechanical Properties and Microstructures with Equivalent Strain in Pure Fe Processed by High Pressure Torsion
Kaveh Edalati, Tadayoshi Fujioka and Zenji Horita51-55 : High Tensile Strength of Low-Carbon Ferritic Steel Subjected to Severe Drawing
Tetsuya Suzuki, Yo Tomota, Atsushi Moriai and Hitoshi Tashiro56-63 : Brittle-Ductile Transition in Low Carbon Steel Deformed by the Accumulative Roll Bonding Process
Masaki Tanaka, Kenji Higashida, Tomotsugu Shimokawa and Tatsuya Morikawa64-69 : Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding
Takahiro Kunimine, Naoki Takata, Nobuhiro Tsuji, Toshiyuki Fujii, Masaharu Kato and Susumu Onaka70-75 : Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing
Yoji Furukawa, Toshiyuki Fujii, Susumu Onaka and Masaharu Kato76-81 : Fabrication and Characterization of Supersaturated Al-Mg Alloys by Severe Plastic Deformation and Their Mechanical Properties
Kenji Kaneko, Tetsuro Hata, Tomoharu Tokunaga and Zenji Horita82-86 : The Evolution of Microstructure and Mechanical Properties of a 5052 Aluminium Alloy by the Application of Cryogenic Rolling and Warm Rolling
Ui Gu Gang, Sang Hun Lee and Won Jong Nam87-91 : Grain Refinement and Mechanical Behavior of the Al Alloy, Subjected to the New SPD Technique
Ruslan Z. Valiev, Maxim Yu. Murashkin, Elena V. Bobruk and Georgy I. Raab92-95 : Scaling-Up of High Pressure Torsion Using Ring Shape
Kaveh Edalati and Zenji Horita96-100 : Microstructure Evolution in Pure Al Processed with Twist Extrusion
Dmitry Orlov, Yan Beygelzimer, Sergey Synkov, Viktor Varyukhin, Nobuhiro Tsuji and Zenji Horita101-110 : Partial Grain Refinement in Al-3%Cu Alloy during ECAP at Elevated Temperatures
Inna Mazurina, Taku Sakai, Hiromi Miura, Oleg Sitdikov and Rustam Kaibyshev111-116 : Achieving Microstructural Refinement in Magnesium Alloys through Severe Plastic Deformation
Roberto B. Figueiredo and Terence G. Langdon117-122 : Microstructural Evolution of Ti-Mo-Ni-C Powder by Mechanical Alloying
Hiroyuki Hosokawa, Kiyotaka Kato, Koji Shimojima and Akihiro Matsumoto123-129 : Kinetics and Morphology of Isothermal Transformations at Intermediate Temperature in 15CrMnMoV Steel
Mokuang Kang, Ming-Xing Zhang, Feng Liu and Ming Zhu130-137 : Solid-State Reactive Diffusion between Sn and Electroless Ni–P at 473 K
Masafumi Yamakami and Masanori Kajihara138-144 : Determination of True Stress–Strain Curves of Sheet Metals in Post-Uniform Elongation Range
Kenichi Hasegawa, Zhong-Chun Chen, Keiou Nishimura and Keisuke Ikeda145-151 : Weibull Statistics for Evaluating Failure Behaviors and Joining Reliability of Friction Stir Spot Welded 5052 Aluminum Alloy
Chung-Wei Yang, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Jiun-Yu Juo152-157 : Geometry Constrained Plasticity of Bulk Metallic Glass
K. Mondal and K. Hono158-160 : Residual Stress Relaxation in Shot Peened Surface Layer on TiB2/Al Composite under Applied Loading
Weizhi Luan, Chuanhai Jiang and Vincent Ji161-166 : Finite Element Simulation with Coupled Thermo-Mechanical Analysis of Superplastic Dieless Tube Drawing Considering Strain Rate Sensitivity
Tsuyoshi Furushima and Ken-ichi Manabe167-170 : Fine Measurement of Thermal Conductivity for (Bi0.5Sb1.5)Te3 Compounds
Takashi Hamachiyo, Maki Ashida and Kazuhiro Hasezaki171-176 : Removal of Trace Impurity from Limestone Using Flotation Techniques
Masami Tsunekawa, Yugo Honma, Kyoungkeun Yoo, Naoki Hiroyoshi and Mayumi Ito177-181 : Effects of Water Absorption on Impact Value of Aluminum Dispersed Composite Nylon6
Masae Kanda and Yoshitake Nishi182-186 : Direct Dry Syntheses and Thermal Analyses of a Series of Aluminum Complex Hydrides
T. Sato, K. Ikeda, H.-W. Li, H. Yukawa, M. Morinaga and S. Orimo187-191 : Synthesis of Ultra Fine Titanium-Tungsten Carbide Powder from Titanium Dioxide and Ammonium Metatungstate
Gil-Geun Lee and Gook-Hyun Ha192-196 : Surface Modification of Porous Metals Using Friction Phenomena
Yong-Jai Kwon, Ichinori Shigematsu and Naobumi Saito197-203 : Dissimilar Friction Stir Welding for Tailor-Welded Blanks of Aluminum and Magnesium Alloys
Ichinori Shigematsu, Yong-Jai Kwon and Naobumi Saito204-209 : FeSiBPCu Nanocrystalline Soft Magnetic Alloys with High Bs of 1.9 Tesla Produced by Crystallizing Hetero-Amorphous Phase
Akihiro Makino, He Men, Takeshi Kubota, Kunio Yubuta and Akihisa Inoue210-214 : Microstructure Refinement and Texture Evolution of Titanium by Friction Roll Surface Processing
Meiqin Shi, Yoshimasa Takayama, Tomohiro Umetsu, Hajime Kato, Hideo Watanabe and Hirofumi Inoue215-218 : Deoxidation Thermodynamics of β-Titanium by Ca-CaCl2 and Ca-CaF2 Fluxes
Seung-Min Han, Young-Seok Lee, Joo-Hyun Park, Good-Sun Choi and Dong-Joon Min219-221 : The Synthesis of Graded Thermal Barrier Coatings on Nickel Substrates by Laser Induced Thermite Reactions
T. M. Yue, H. O. Yang, T. Li and K. J. Huang222-225 : Stabilization of Stacking Faults and a Long Period Stacking Phase Dispersed in α-Mg Crystalline Grains of Mg-0.7 at%Zn-1.4 at%Y Alloy
Jongbeom Lee, Kazuhisa Sato, Toyohiko J. Konno and Kenji Hiraga226-228 : Direct Bonding to Aluminum with Silver-Oxide Microparticles
Toshiaki Morita, Yusuke Yasuda, Eiichi Ide and Akio Hirose
http://uploading.com/files/6NO6YSNZ/cv08.rar.html
=========
http://rapidshare.com/files/256916766/cv08.rar
