Masonry (ASTM special technical publication, 1496)
Masonry (ASTM special technical publication, 1496)
ASTM International | 2008-01 | 161 pages | English | ISBN : 0803134924,0803134928 | PDF | 2.2MB
Product description :
Thirteen peer-reviewed papers cover the latest information on all aspects of masonry materials, design, specification, construction, maintenance and rehabilitation.
Topics cover:
• Glazed brick cladding
• Analyzing hardened masonry mortars
• Masonry beams
• Stone adhered veneer
• Concrete masonry walls
• Brick masonry
• And much more!
Table of Contents
Overview
Investigation and Repair of Glazed Brick Cladding: A Case Study
Gorrell T., Chin I.
A Discussion of the Benefits and Problems of ASTM C 1324 for Analyzing Hardened Masonry Mortars
Powers L., Coleman A., Papas S.
Laboratory Study of Time-of-Tooling Effects on Mortar Joint Color
Erlin B., Conway T.
The Selection and Use of Natural and Manufactured Stone Adhered Veneer
Godbey R., Thomson M.
Deflection Criteria for Masonry Beams
Bennett R., McGinley W., Bryja J.
Variations in the Activity of Dry-Powder Water-Repellent Mortar Admixtures with Different Mortar Formulae
Nordmeyer H., Hall P.
Evaluation of ASTM Methods to Determine Splitting Tensile Strength in Concrete, Masonry, and Autoclaved Aerated Concrete
Parker C., Tanner J., Varela J.
Type S Portland Cement-Lime Mortar as a Low-Lift Grout
Biggs D., Thomson M.
The Effect of Void Area on Brick Masonry Performance
Sanders J., Brosnan D.
Evaluation of the Effectiveness of Clear Water Repellent Coatings on Partially Grouted Single-Wythe Concrete Masonry Walls
Greenwald J., Young T.
Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms
Cohen G., Klingner R., Hayes J., Sweeney S.
Greening of Mortars with Pozzolans
Bargaheiser K., Nordmeyer D.
Replacement of the Final Time of Setting Maximum with an Initial Time of Setting Maximum as measured with the Gillmore Needles in ASTM C 91, C 1328, and C 1329
Conway J.
link
http://depositfiles.com/files/2vx75v24h
Masonry (ASTM special technical publication, 1496)
ASTM International | 2008-01 | 161 pages | English | ISBN : 0803134924,0803134928 | PDF | 2.2MB
Product description :
Thirteen peer-reviewed papers cover the latest information on all aspects of masonry materials, design, specification, construction, maintenance and rehabilitation.
Topics cover:
• Glazed brick cladding
• Analyzing hardened masonry mortars
• Masonry beams
• Stone adhered veneer
• Concrete masonry walls
• Brick masonry
• And much more!
Table of Contents
Overview
Investigation and Repair of Glazed Brick Cladding: A Case Study
Gorrell T., Chin I.
A Discussion of the Benefits and Problems of ASTM C 1324 for Analyzing Hardened Masonry Mortars
Powers L., Coleman A., Papas S.
Laboratory Study of Time-of-Tooling Effects on Mortar Joint Color
Erlin B., Conway T.
The Selection and Use of Natural and Manufactured Stone Adhered Veneer
Godbey R., Thomson M.
Deflection Criteria for Masonry Beams
Bennett R., McGinley W., Bryja J.
Variations in the Activity of Dry-Powder Water-Repellent Mortar Admixtures with Different Mortar Formulae
Nordmeyer H., Hall P.
Evaluation of ASTM Methods to Determine Splitting Tensile Strength in Concrete, Masonry, and Autoclaved Aerated Concrete
Parker C., Tanner J., Varela J.
Type S Portland Cement-Lime Mortar as a Low-Lift Grout
Biggs D., Thomson M.
The Effect of Void Area on Brick Masonry Performance
Sanders J., Brosnan D.
Evaluation of the Effectiveness of Clear Water Repellent Coatings on Partially Grouted Single-Wythe Concrete Masonry Walls
Greenwald J., Young T.
Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms
Cohen G., Klingner R., Hayes J., Sweeney S.
Greening of Mortars with Pozzolans
Bargaheiser K., Nordmeyer D.
Replacement of the Final Time of Setting Maximum with an Initial Time of Setting Maximum as measured with the Gillmore Needles in ASTM C 91, C 1328, and C 1329
Conway J.
link
http://depositfiles.com/files/2vx75v24h
