Nondestructive Testing of Deep Foundations
Nondestructive Testing methods are used at all stages of a structure's life - from new construction quality control to residual lifetime prediction, and even during the monitoring of demolition. In addition, Nondestructive Testing is being increasingly specified in deep foundation projects, though often without a good understanding of its limitations and with the result that methods are often misused. In order to be able to specify an appropriate method, or to recognize an inappropriate specification, it is necessary for the engineer, specifier and/or contractor to understand the capabilities and limitations of each of the methods currently in use.
1. INTRODUCTION AND A BRIEF HISTORY.
1.1Introduction.
1.2A Brief History of Deep Foundations and the Advent of NDT.
1.3Deep Foundation Failures and ND.
1.4 Deficiencies in Existing Foundations.
2. Deep Foundation Construction Methods.
2.1Driven Piles – Timber, Steel and Concrete.
2.2Caissons and Drilled Shafts.
2.3Diaphragm Walls, Cut-off Walls and Barrettes.
2.4Augured, Cast-in-place Pile.
2.5 Micropiles or Minipiles.
2.6Stone Columns and other Soil Improvement Techniques.
3. HOW SOILS AFFECT THE CHOICE OF FOUNDATION.
4. TRADITIONAL, VISUAL AND NEW INSPECTION METHODS FOR DEEP FOUNDATION CONSTRUCTION.
1.1 Driven Piles.
4.2 Augured Cast-in-place Piles.
4.3Drilled Shafts.
4.4The Inspector’s Role.
5. A REVIEW OF FULL-SCALE LOAD-TESTING TECHNIQUES.
5.1Static Load-test Techniques – Axial Compression.
5.2Static Load-test Techniques – Axial Tension.
5.3Static Load-test Techniques – Lateral.
6. HIGH-STRAIN TESTING FOR CAPACITY AND/OR INTEGRITY.
6.1High-strain Dynamic (Drop-weight) Testing of Driven Piles.
6.2High-strain Testing of Drilled Shafts and Augered,Cast-in-place Piles.
6.3Modification of Shaft Head for High-strain Tests.
6.4Practical Considerations for Drop-weight Techniques.
6.5HSDT Alternatives.
6.6Limitations of High-strain Dynamic Testing.
7. LOW-STRAIN SURFACE TESTS – SONIC ECHO.
7.1Sonic Echo (Impulse Echo).
8. SONIC MOBILITY (IMPULSE RESPONSE).
8.1Principles of Impulse–Response Curve Interpretation.
8.2Practical Considerations.
8.3Classification of Signal Responses.
8.4Pile Simulation Techniques.
8.5Time Domain–Velocity Reflectors.
9. THE IMPEDANCE-LOG ANALYSIS.
10.LOW-STRAIN DOWN-HOLE TESTS.
10.1 Introduction.
10.2 Cross-Hole Sonic Logging.
10.3Cross-Hole Tomography.
10.4 Single-Hole Sonic Logging.
10.5Gamma–Gamma Logging.
10.6Parallel Seismic Testing.
11. FIELD MOCK-UPS OF DEEP FOUNDATIONS: CLASS-A PREDICTIONS.
12. THE RELIABILITY OF PILE SHAFT INTEGRITY TESTING.
12.1 Statistical NDT Sampling Schemes.
12.2 Methodology Reliability.
13. CURRENT RESEARCH.
13.1 Developments in Measurements and Analysis.
13.2Electrical Methods.
13.3Optical Techniques.
13.4Guided Wave Analysis.
13.5Statistical Analysis.
13.6Self-consolidating Concrete.
13.7Acceptable Vibration Levels.
13.8Automated Monitoring Systems.
13.9Wireless Acquisition Systems.
13.10Smart’ Structures.
14. THE PLACE OF NONDESTRUCTIVE TESTING AT THE BEGINNING OF THE 21ST CENTURY.
14.1Nondestructive Testing and Load and Resistance Factor Design.
14.2Setting Up an Effective Quality Management Program.
14.3Who’s Testing the Tester?.
14.4Acceptance Criteria.
14.5 Evaluating Defects
links
http://ifile.it/aq3k0m4/0470848502.zip
or
http://www.filefactory.com/file/1149d9/n/0470848502_zip
Nondestructive Testing methods are used at all stages of a structure's life - from new construction quality control to residual lifetime prediction, and even during the monitoring of demolition. In addition, Nondestructive Testing is being increasingly specified in deep foundation projects, though often without a good understanding of its limitations and with the result that methods are often misused. In order to be able to specify an appropriate method, or to recognize an inappropriate specification, it is necessary for the engineer, specifier and/or contractor to understand the capabilities and limitations of each of the methods currently in use.
1. INTRODUCTION AND A BRIEF HISTORY.
1.1Introduction.
1.2A Brief History of Deep Foundations and the Advent of NDT.
1.3Deep Foundation Failures and ND.
1.4 Deficiencies in Existing Foundations.
2. Deep Foundation Construction Methods.
2.1Driven Piles – Timber, Steel and Concrete.
2.2Caissons and Drilled Shafts.
2.3Diaphragm Walls, Cut-off Walls and Barrettes.
2.4Augured, Cast-in-place Pile.
2.5 Micropiles or Minipiles.
2.6Stone Columns and other Soil Improvement Techniques.
3. HOW SOILS AFFECT THE CHOICE OF FOUNDATION.
4. TRADITIONAL, VISUAL AND NEW INSPECTION METHODS FOR DEEP FOUNDATION CONSTRUCTION.
1.1 Driven Piles.
4.2 Augured Cast-in-place Piles.
4.3Drilled Shafts.
4.4The Inspector’s Role.
5. A REVIEW OF FULL-SCALE LOAD-TESTING TECHNIQUES.
5.1Static Load-test Techniques – Axial Compression.
5.2Static Load-test Techniques – Axial Tension.
5.3Static Load-test Techniques – Lateral.
6. HIGH-STRAIN TESTING FOR CAPACITY AND/OR INTEGRITY.
6.1High-strain Dynamic (Drop-weight) Testing of Driven Piles.
6.2High-strain Testing of Drilled Shafts and Augered,Cast-in-place Piles.
6.3Modification of Shaft Head for High-strain Tests.
6.4Practical Considerations for Drop-weight Techniques.
6.5HSDT Alternatives.
6.6Limitations of High-strain Dynamic Testing.
7. LOW-STRAIN SURFACE TESTS – SONIC ECHO.
7.1Sonic Echo (Impulse Echo).
8. SONIC MOBILITY (IMPULSE RESPONSE).
8.1Principles of Impulse–Response Curve Interpretation.
8.2Practical Considerations.
8.3Classification of Signal Responses.
8.4Pile Simulation Techniques.
8.5Time Domain–Velocity Reflectors.
9. THE IMPEDANCE-LOG ANALYSIS.
10.LOW-STRAIN DOWN-HOLE TESTS.
10.1 Introduction.
10.2 Cross-Hole Sonic Logging.
10.3Cross-Hole Tomography.
10.4 Single-Hole Sonic Logging.
10.5Gamma–Gamma Logging.
10.6Parallel Seismic Testing.
11. FIELD MOCK-UPS OF DEEP FOUNDATIONS: CLASS-A PREDICTIONS.
12. THE RELIABILITY OF PILE SHAFT INTEGRITY TESTING.
12.1 Statistical NDT Sampling Schemes.
12.2 Methodology Reliability.
13. CURRENT RESEARCH.
13.1 Developments in Measurements and Analysis.
13.2Electrical Methods.
13.3Optical Techniques.
13.4Guided Wave Analysis.
13.5Statistical Analysis.
13.6Self-consolidating Concrete.
13.7Acceptable Vibration Levels.
13.8Automated Monitoring Systems.
13.9Wireless Acquisition Systems.
13.10Smart’ Structures.
14. THE PLACE OF NONDESTRUCTIVE TESTING AT THE BEGINNING OF THE 21ST CENTURY.
14.1Nondestructive Testing and Load and Resistance Factor Design.
14.2Setting Up an Effective Quality Management Program.
14.3Who’s Testing the Tester?.
14.4Acceptance Criteria.
14.5 Evaluating Defects
links
http://ifile.it/aq3k0m4/0470848502.zip
or
http://www.filefactory.com/file/1149d9/n/0470848502_zip