jam1966
مشرف عام سابق
بسم الله الرحمن الرحيم
السلام عليكم ورحمة الله
برنامج التصميم الهندسي الصناعي Ashlar Graphite v7.6.1
Ashlar-Vellum is quite an old name in CAD. Their 2D CAD system was available only on the Macintosh back before M*crosoft Windows existed, when almost all CAD systems were on Unix workstations, plus a few 2D ones on DOS. They all had their own individualistic user interfaces, often depending heavily, as with the early AutoCAD of the time, on laborious typing of cryptic commands. In contrast, Ashlar-Vellum on the Mac at that time looked and worked rather similarly to the very latest and most innovative of today’s Windows CAD products. Their slogan is "Software that works the way you think", and that is very appropriate.
The fact that it was only on the Mac limited its penetration of the CAD community. After Windows eventually became a viable system with Windows-95, Ashlar-Vellum was produced for Windows as well as Mac, but it doesn’t seem to have been noticed very much. The company is currently making a renewed push into the general CAD market, with a suite of products aimed at various segments of the CAD market. This product, Graphite, is the mainly 2D drafting system. They also make comprehensive 3D modeling products as well.
This latest version exhibits much the same style and methods that I recall from the Mac versions from way back. That’s not surprising, since it was then so far ahead of its time. In recent years several of the best-known CAD companies have licensed certain user interface technologies from Ashlar-Vellum to greatly enhance their speed and ease of use. But the genuine Ashlar-Vellum still embodies many unique methods that give it an edge in usability.
The distribution CD contains both Mac and Windows versions and I tried out the Windows version. It installed to 165Mb of disk space including 117Mb for the extensive symbol libraries. It displays with the very uncluttered simple style common with Mac graphics programs, rather than using a lot of screen devices and toolbars that restrict the working area. This can be seen in the illustration below, which also shows the right-click menu that pops-up only while needed. I like the use of a single vertical toolbar down the left with fly-out sub toolbars for each category of tool. This minimizes the screen space consumed yet provides one-touch access to all tools
http://www.ashlar.com/sections/products/graphite/Graphite_Spec_Sheet.pdf
http://www.ashlar.com/sections/products/graphite/Graphite_Product_Sheet.pdf
حمل من المرفقات
نسألكم الدعاء لنا ولكم وللمجاهدين في سبيل الله في كل مكان وللمسلمين اجمعين
السلام عليكم ورحمة الله
برنامج التصميم الهندسي الصناعي Ashlar Graphite v7.6.1
Ashlar-Vellum is quite an old name in CAD. Their 2D CAD system was available only on the Macintosh back before M*crosoft Windows existed, when almost all CAD systems were on Unix workstations, plus a few 2D ones on DOS. They all had their own individualistic user interfaces, often depending heavily, as with the early AutoCAD of the time, on laborious typing of cryptic commands. In contrast, Ashlar-Vellum on the Mac at that time looked and worked rather similarly to the very latest and most innovative of today’s Windows CAD products. Their slogan is "Software that works the way you think", and that is very appropriate.
The fact that it was only on the Mac limited its penetration of the CAD community. After Windows eventually became a viable system with Windows-95, Ashlar-Vellum was produced for Windows as well as Mac, but it doesn’t seem to have been noticed very much. The company is currently making a renewed push into the general CAD market, with a suite of products aimed at various segments of the CAD market. This product, Graphite, is the mainly 2D drafting system. They also make comprehensive 3D modeling products as well.
This latest version exhibits much the same style and methods that I recall from the Mac versions from way back. That’s not surprising, since it was then so far ahead of its time. In recent years several of the best-known CAD companies have licensed certain user interface technologies from Ashlar-Vellum to greatly enhance their speed and ease of use. But the genuine Ashlar-Vellum still embodies many unique methods that give it an edge in usability.
The distribution CD contains both Mac and Windows versions and I tried out the Windows version. It installed to 165Mb of disk space including 117Mb for the extensive symbol libraries. It displays with the very uncluttered simple style common with Mac graphics programs, rather than using a lot of screen devices and toolbars that restrict the working area. This can be seen in the illustration below, which also shows the right-click menu that pops-up only while needed. I like the use of a single vertical toolbar down the left with fly-out sub toolbars for each category of tool. This minimizes the screen space consumed yet provides one-touch access to all tools
http://www.ashlar.com/sections/products/graphite/Graphite_Spec_Sheet.pdf
http://www.ashlar.com/sections/products/graphite/Graphite_Product_Sheet.pdf
حمل من المرفقات
نسألكم الدعاء لنا ولكم وللمجاهدين في سبيل الله في كل مكان وللمسلمين اجمعين