IEEE Std Collection II (Power Systems)

chemistry

chemistry

مستشار كلية العلوم النهرالخالد
طاقم الإدارة
(hi)(hi)(hi)(hi)
:gift::gift:
IEEE Std Collection II
(Power Systems)
by
IEEE

the list:
1. IEEE Std 11-2000 00862609 --- IEEE standard for rotating electric machinery for rail and road vehicles.
2. IEEE Std 108-1955_ AIEE No.450-April 1955 00029007 --- Proposed recommended guide for specification of electronic voltmeters.
3. IEEE Std 111-2000 00959089 --- IEEE standard for wide-band (greater than 1 decade) transformers/
4. IEEE Std 112-1984 00030683 --- IEEE standard test procedure for polyphase induction motors and generators.
5. IEEE Std 112-1991 00210975 --- IEEE standard test procedure for polyphase induction motors and generators.
6. IEEE Std 112-1996 0058753 (Revision of IEEE Std 112-1991) --- IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.
7. IEEE Std 112-2004 (Revision of IEEE Std 112-1996) 01353938 --- IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.
8. IEEE Std 1013-1990 00210970 --- IEEE recommended practice for sizing important for photovoltaic (PV) systems.
9. IEEE Std 1013-2000 00912951 --- IEEE recommended practice for sizing lead-acid batteries for photovoltaic (PV) systems.
10. IEEE Std 1015-1997 00648097 --- IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems.
11. IEEE Std 1015-2006 (Revision of IEEE Std 1015-1997) 01707467 --- IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems.
12. IEEE Std 1017-1985 00030691 --- IEEE recommended practice for field testing electric submersible pump cable.
13. IEEE Std 1017-1991 00182796 --- IEEE recommended practice for field testing electric submersible pump cable.
14. IEEE Std 1017-2004 (Revision of IEEE Std 1017-1991) 01425809 --- IEEE recommended practice for field testing electric submersible pump cable.
15. IEEE Std 1018-1985 00030693 --- IEEE recommended practice for specifying electric submersible pump cable - ethylene-propylene rubber.
16. IEEE Std 1018-1991 00182800 --- IEEE recommended practice for specifying electric submersible pump cable - ethylene-propylene rubber.
17. IEEE Std 1018-2004 (Revision of IEEE Std 1018-1991) 01425766 --- IEEE recommended practice for specifying electric submersible pump cable - ethylene-propylene rubber.
18. IEEE Std 1019-1985 00030696 --- IEEE recommended practice for specifying electric submersible pump cable - polypropylene insulation.
19. IEEE Std 1019-1991 00573280 --- American National Standard IEEE Recommended Practice For Specifying Electric submersible pump cable - polypropylene insulation.
20. IEEE Std 1019-2004 (Revision of IEEE Std 1019-1991) 01425767 --- IEEE recommended practice for specifying electric submersible pump cable - polypropylene insulation.
21. IEEE Std 1020-1988 00029139 --- IEEE Guide for Control of Small Hydroelectric important
22. IEEE Std 1023-1988 00029133 --- IEEE Guide for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations.
23. IEEE Std 1023-2004 (Revision of IEEE Std 1023-1988) 01440988 --- IEEE Guide for the Application of Human Factors Engineering to Systems, important, and Facilities of Nuclear Power Generating Stations.
24. IEEE Std 1024-1988 00029135 --- IEEE recommended practice for specifying distribution composite insulators (suspension type).
25. IEEE Std 1025-1993 00278287 --- IEEE Guide to the Assembly and Erection of Concrete Pole Structures.
26. IEEE Std 1026-1995 00499844 --- IEEE Recommended Practice for Test Methods for Determination of Compatibility of Materials With Conductive Polymeric Insulation Shields and important.
27. IEEE Std 1027-1996 00627915 --- Revision of IEEE Std 1027-1984, IEEE Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone Receiver.
28. IEEE Std 1027 00027893 --- Draft trial-use standard method for measuring the magnetic field intensity around a telephone receive.
29. IEEE Std 1031-1991 00159459 --- IEEE guide for a detailed functional specification and application of static VAr compensators.
30. IEEE Std 1031-2000 (Revision of IEEE Std 1031-1991) 01277892 --- IEEE Guide for the Functional Specification of Transmission Static Var Compensators.
31. IEEE Std 1033-1985 00587779 --- IEEE Recommended Practice For Application Of IEEE Std 828 to Nuclear Power Generating Stations.
32. IEEE Std 1036-1992 00211735 --- IEEE guide for application of shunt power capacitors.
33. IEEE Std 1043-1989 00089796 --- IEEE recommended practice for voltage-endurance testing of form-wound bars and coils.
34. IEEE Std 1043-1996 00591673 (Revision of IEEE Std 1043-1989) --- IEEE recommended practice for voltage-endurance testing of form-wound bars and coils.
35. IEEE Std 1046-1991 00159083 --- IEEE application guide for distributed digital control and monitoring for power plants.
36. IEEE Std 1048-1990 00089799 --- IEEE guide for protective grounding of power lines.
37. IEEE Std 1048-2003 (Revision of IEEE Std 1048-1990) 01237558 --- IEEE guide for protective grounding of power lines.
38. IEEE Std 1067-1990 00159303 --- IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV AC.
39. IEEE Std 1067-1996 00499845 --- IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV ac and ± 750 kV dc.
40. IEEE Std 1067-2005 (Revision of IEEE Std 1067-1995) 01513416 --- IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV ac and ± 750 kV dc.
41. IEEE Std 1068-1990 00089805 --- IEEE recommended practice for the repair and rewinding of motors for the petroleum and chemical industry.
42. IEEE Std 1068-1996 00574689 --- IEEE recommended practice for the repair and rewinding of motors for the petroleum and chemical industry.
43. IEEE Std 1082-1997 00643514 --- Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations.
44. IEEE Std 1094-1991 00210965 --- IEEE recommended practice for the electrical design and operation of windfarm generating stations.
45. IEEE Std 1095-1989 00089808 --- IEEE guide for installation of vertical generators and generatormotors for hydroelectric application.
46. IEEE Std 1106-1995 00477875 (Revision of IEEE Std 1106-1987) --- IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications.
47. IEEE Std 1106-2005 (Revision of IEEE Std 1106-1995) 01577465 --- IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications.
48. IEEE Std 1107-1996 00531505 --- IEEE Recommended Practice for Thermal Evaluation of Sealed Insulation System for AC Electric Machinery Employing Random-Wound Stator Coils.
49. IEEE Std 1109-1990 00210978 --- IEEE guide for the interconnection of user-owned substations to electric utilities.
50. IEEE Std 1110-1991 00159388 --- IEEE Guide for Synchronous Generator Modeling Practices in Stability Analyses.
51. IEEE Std 1110-2002 (Revision of IEEE Std 1110-1991) 01251520 --- IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses.
52. IEEE Std 1115-2000 00868606 --- IEEE recommended practice for sizing nickel-cadmium batteries for stationary applications.
53. IEEE Std 1119-1988 00029127 --- IEEE guide for fence safety clearances in electric-supply stations.​

Link
http://rapidshare.com/files/136228247/IEEE_Std_Collection.part01.rar
http://rapidshare.com/files/136229106/IEEE_Std_Collection.part02.rar
http://rapidshare.com/files/136229857/IEEE_Std_Collection.part03.rar
http://rapidshare.com/files/136230629/IEEE_Std_Collection.part04.rar
http://rapidshare.com/files/136231507/IEEE_Std_Collection.part05.rar
http://rapidshare.com/files/136232362/IEEE_Std_Collection.part06.rar
http://rapidshare.com/files/136233117/IEEE_Std_Collection.part07.rar
http://rapidshare.com/files/136233983/IEEE_Std_Collection.part08.rar
http://rapidshare.com/files/136227438/IEEE_Std_Collection.part09.rar
Password: 123456



​
 


بارك الله فيك اخي

عمل ممتاز

جعله الله في ميزان حسناتك
​
 


اشكركم جميعا على المرور
وكل عام وانت بخير​
 


اليك يا عزيزي المجموعه الاولي

ANSI / IEEE Standards Collection

List:

1. ANSI C37.42-1996 American National Standard Specification for

High-Voltage Expulsion Type Distribution Class Fuses%2C Cutouts%2C

Fuse Disconnecting Switches and Fuse Links.

2. ANSI_IEEE C67.92-1987 --- IEEE Guide For The Application Of

Neutral Grounding In Electrical Utility Systems Part I-introduction.

3. ANSI_IEEE Std 432-1976 --- IEEE guide for insulation maintenance

for rotating electrical machinery (5 hp to less than 10 000 hp).

4. ANSI_IEEE Std 665-1995 --- IEEE guide for generating station

grounding.

5. ANSI-IEEE Std 125-1988 --- IEEE recommended practice for

preparation of equipment specifications for speed-governing of

hydraulic turbines intended to drive electric generators.

6. ANSI--IEEE Std 576-1989 IEEE recommended practice for

installation, termination, and testing of insulated power cable as

used in the petroleum and chemical industry.

7. ANSI--IEEE Std C37.97-1979 --- IEEE Guide for Protective Relay

Applications to Power System Buses.

8. ANSI--IEEE Std C57.12.56-1986 --- IEEE Standard Test Procedure

for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type

Power and Distribution Transformers.

9. IEEE Std 18-2002 (Revision of IEEE Std 18-1992) --- IEEE Standard

for Shunt Power Capacitors.

10. IEEE Std 80-2000 - IEEE guide for safety in AC substation

grounding.

11. IEEE Std 142-2007 (Revision of IEEE Std 142-1991) --- IEEE

Recommended Practice for Grounding of Industrial and Commercial

Power Systems.

12. IEEE Std 260.1-2004 (Revision of IEEE Std 260.1-1993) --- IEEE

Standard Letter Symbols for Units of Measurement (SI Units,

Customary Inch-Pound Units, and Certain Other Units).

13. IEEE Std 519-1992 --- IEEE recommended practices and

requirements for harmonic control in electrical power systems.

14. IEEE Std 929-2000 --- IEEE recommended practice for utility

interface of photovoltaic (PV) systems.

15. IEEE Std 937-2000 --- IEEE recommended practice for installation

and maintenance of lead-acid batteries for photovoltaic.

16. IEEE Std 937-2007 --- IEEE Recommended Practice for Installation

and Maintenance of Lead-Acid Batteries for Photovoltaic %28PV%29

Systems.

17. IEEE Std 943-1986 (1992) --- IEEE Guide for Aging Mechanisms and

Diagnostic Procedures in Evaluating Electrical Insulation Systems.

18. IEEE Std 946-1992 --- IEEE recommended practice for the design

of DC auxiliary power systems for generating stations.

19. IEEE Std 946-2005 --- IEEE recommended practice for the design

of DC auxiliary power systems for generating stations.

20. IEEE Std 958-2003 --- IEEE Guide for the Application of AC

Adjustable-Speed Drives on 2400 to 13 800 V Auxiliary Systems in

Electric Power Generating Stations.

21. IEEE Std 1010-2006 --- IEEE Guide for Control of Hydroelectric

Power Plants.

22. IEEE Std 1050-1996 --- IEEE Guide for Instrumentation and

Control Grounding in Generating Stations.

23. IEEE Std 1100-1992 --- IEEE recommended practice for powering

and grounding sensitive electronic equipment.

24. IEEE Std 1100 - 2005 --- IEEE Recommended Practice for Powering

and Grounding Electronic Equipment.

25. IEEE Std 1120 - 2004 --- IEEE Guide for the Planning, Design,

Installation, and Repair of Submarine Power Cable Systems.

26. IEEE Std 1125-1993 --- IEEE guide for moisture measurement and

control in SF6 Gas-Insulated Equipment.

27. IEEE Std 1138-1994 --- IEEE Standard Construction of Composite

Fiber Optic Overhead Ground Wire - OPGW - for Use on Electric

Utility Power Lines.

28. IEEE Std 1142-1995 --- IEEE Guide for the Design, Testing, and

Application of Moisture-Impervious, Solid Dielectric, 5-35 kV Power

Cable Using Metal-Plastic Laminates.

29. IEEE Std 1143-1994 IEEE guide on shielding practice for low

voltage cables.

30. IEEE Std 1159-1995 --- IEEE Recommended Practice for Monitoring

Electric Power Quality.

31. IEEE Std 1159.3-2003 --- IEEE Recommended Practice for the

Transfer of Power Quality Data.

32. IEEE Std 1184-2006 --- IEEE Guide for Batteries for

Uninterruptible Power Supply Systems.

33. IEEE Std 1247™-2005 (Revision of IEEE Std 1247-1998) --- IEEE

Standard for Interrupter Switches for Alternating Current, Rated

Above 1000 Volts.

34. IEEE Std 1248-1998 --- IEEE guide for the commissioning of

electrical systems inhydroelectric power plants.

35. IEEE Std 1248-1998 IEEE guide for the commissioning of

electrical systems in hydroelectric power plants.

36. IEEE Std 1283-2004 --- IEEE Guide for Determining the Effects of

High-Temperature Operation on Conductors%2C Connectors%2C and

Accessories.

37. IEEE Std 1300-1996 IEEE guide for cable connections for gas-

insulated substations.

38. IEEE Std 1349-2001--- IEEE Guide for the Application of Electric

Motors in Class I, Division 2 Hazardous (Classified) Locations.

39. IEEE Std 1366-2003 (Revision of IEEE Std 1366-1998) --- IEEE

Guide for Electric Power Distribution Reliability Indices.

40. IEEE Std 1366- 2001 --- IEEE guide for electric power

distribution reliability indices.

41. IEEE Std 1410-2004 (Revision of IEEE Std 1410-1997) --- IEEE

guide for improving the lightning performance of electric power

overhead distribution lines.

42. IEEE Std 1513-2001--- IEEE Recommended Practice for

Qualification of Concentrator.

43. IEEE Std C37-91-2000 --- IEEE guide for protective relay

applications to power transformers.

44. IEEE Std C37.1-1994 (Revision of IEEE Std C37.1-1987) --- IEEE

Standard Definition, Specification, and Analysis of Systems Used for

Supervisory Control, Data Acquisition, and Automatic Control.

45. IEEE Std C37.2-1991 --- IEEE standard electrical power system

device function numbers.

46. IEEE Std C37.011-1994 --- IEEE Application Guide for Transient

Recovery Voltage for AC High- Voltage Circuit Breakers Rated on a

Symmetrical Current Basis.

47. IEEE Std C37.13-1990 (1995) --- IEEE Standard for Low-Voltage AC

Power Circuit Breakers Used in Enclosures.

48. IEEE Std C37.013-1997 --- IEEE Standard for AC High-Voltage

Generator Circuit Breaker Rated on a Symmetrical Current Basis.

49. IEEE Std C37.14-1992 --- IEEE Standard for Low-Voltage DC Power

Circuit Breakers Used in Enclosures.

50. IEEE Std C37.20.1-1993 (Revision of IEEE Std C37.20.1-1987) ---

IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker

Switchgear.

51. IEEE Std C37.20.2-1993 --- IEEE Standard for Metal-Clad and

Station-Type Cubicle Switchgear.

52. IEEE Std C37.21™-2005 --- IEEE Standard for Control

Switchboards.

53. IEEE Std C37.90™-2005 (Revision of IEEE Std C37.90-1989) ---

IEEE Standard for Relays and Relay system Associated with electric

Power Apparatus.

54. IEEE Std C37.96-2000 --- IEEE Guide for AC Motor Protection.

55. IEEE Std C37.96-2000-IEEE guide for AC motor protection.

56. IEEE Std C37.99-2000 (Revision of IEEE Std C37.99-1990) --- IEEE

guide for the protection of shunt capacitor banks.

57. IEEE Std C37.113-1999 --- IEEE guide for protective relay

applications to transmission lines.

58. IEEE Std C57.12.00-1993 IEEE Standard General Requirements for

Liquid-Immersed Distribution.

59. IEEE Std C57.12.01-1989 --- IEEE standard general requirements

for dry-type distribution and power transformers including those.

60. IEEE Std C57.12.90-1993 --- Liquid-Immersed Distribution, Power,

and Regulating Transformers and Guide for Short-Circuit Testing.

61. IEEE Std C57.12.91-1995 --- IEEE Test Code for Dry-Type

Distribution and Power Transformers.

62. IEEE Std C57.92-1981 (Reaff 1991) --- IEEE Guide for Loading

Mineral-Oil-Immersed Power Transformers up to and Including 100 MVA

with 55 C or 65 C Average Winding Rise.

63. IEEE Std C57.94-1982 --- IEEE recommended practice for

installation, application, operation and maintenance of dry-type

general purpose distribution and power transformers.

64. IEEE Std C57.98-1993 --- IEEE Guide for Transformer Impulse

Tests.

65. IEEE Std C57.106-1991 --- IEEE guide for acceptance and

maintenance of insulating oil in equipment.

66. IEEE Std C62.11™-2005 (Revision of IEEE Std C62.11-1999) ---

IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits

%28over 1 kV%29.

67. IEEE Std C62.64 TM -1997 --- IEEE Standard Specifications for

Surge Protectors Used in Low-Voltage Data, Communications and

Signaling.

68. IEEE Std C62.92-1989 --- IEEE guide for the application of

neutral grounding in electrical utility systems. Part II - grounding

of synchronous generator systems.

69. IEEE Std C62.92.1-2000 --- IEEE guide for the application of

neutral grounding in electrical utility systems - Part I ---

introduction.

70. IEEE Std C62.92.3-1993 --- IEEE guide for the neutral grounding

in electrical utility systems ( Part III-Generator Auxiliary Sys).

71. IEEE Std C62.92.4-1991 --- IEEE guide for the application of

neutral grounding in electrical utility systems ( part IV -

distribution).

72. IEEE Std C62.92.5-1992 --- IEEE guide for the application of

neutral grounding in electrical utility systems ( part V -

transmission systems and subtransmission systems).

Password: 123456

Link 1
Link 2

good luck

​
 
أسعدنى مرورك جدا اخى
tawfikiya

بارك الله فيك​
 
احتاج جدا بهذاالکتاب

Dialysis membranes: structure and predictions. International workshop proceedings. Marseille, June 25, 1994.
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
عودة
أعلى