jam1966
مشرف عام سابق
بسم الله الرحمن الرحيم
السلام عليكم ورحمة الله
برنامج Quicklogic Quickworks 9.7
188M
QuickWorks 9.7 includes the PowerAware Placer, a tool that minimizes dynamic power by giving priority to power consumption during logic placement. It also includes a sophisticated power calculator that enables accurate modeling of dynamic power consumption based on the actual place and route results. The new power calculator also includes support for power consumption of each I/O Bank of the targeted device.
"Power consumption is moving to the forefront of designers' minds, both for battery operated and heat dissipation-constrained systems," said Brian Faith, Director of Logic Products. "As the semiconductor content of these systems continues to increase, meeting power and heat budgets proves to be increasingly challenging. With the combination of uWatt Low Power Eclipse II FPGAs and QuickWorks 9.6, designers achieve the lowest possible power consumption at the highest performance for their programmable logic design."
QuickWorks V9.7tools have also been extended to support a new design flow interface. This easy-to-use graphical interface lets designers access the integrated tools of QuickWorks without having to navigate menus or toolbars. The graphical interface affords CPLD and FPGA designers new to the QuickLogic design tools an intuitive dashboard for developing and optimizing their designs with QuickLogic devices.
QuickWorks V9.7 includes an ASSP Fabric Interface Wizard that automatically generates the Verilog or VHDL between the internal interface of Embedded Standard Products (ESPs) and the designer's FPGA design. This Wizard was designed to simplify the design flow and accelerate time-to-market for users of ESPs.
Pricing and Availability
The basic QuickWorks V9.7tool is available at no cost for Windows 98, 2000, ME, XP and NT. The software can be downloaded from the QuickLogic website.
QuickLogic provides a complete design environment for Field Programmable Gate Array (FPGA) and Embedded Standard Product (ESP) designs. QuickLogic Development Software helps you increase productivity, shorten design cycles, achieve design Performance and Power requirements quickly and efficiently. QuickLogic provides tools to guide you from Concept to Silicon.
QuickWorks® supports Windows, Sun Solaris and Linux based operating systems and provides a comprehensive design environment ranging from schematic and HDL-base design entry, HDL language editors and tutorials, logic synthesis, place and route, timing analysis, and simulation support. QuickLogic has partnered with Synplicty and Aldec to provide industry leading Synthesis and Simulation tools, as well as provide an interface to other industry standard EDA tools.
In addition, QuickLogic provides various Reference Design Kits and Software Development Kits to shorten your verification cycles.
حمل من المرفقات
لاتنسونا من دعائكم المستجاب ان شاء الله
السلام عليكم ورحمة الله
برنامج Quicklogic Quickworks 9.7
188M
QuickWorks 9.7 includes the PowerAware Placer, a tool that minimizes dynamic power by giving priority to power consumption during logic placement. It also includes a sophisticated power calculator that enables accurate modeling of dynamic power consumption based on the actual place and route results. The new power calculator also includes support for power consumption of each I/O Bank of the targeted device.
"Power consumption is moving to the forefront of designers' minds, both for battery operated and heat dissipation-constrained systems," said Brian Faith, Director of Logic Products. "As the semiconductor content of these systems continues to increase, meeting power and heat budgets proves to be increasingly challenging. With the combination of uWatt Low Power Eclipse II FPGAs and QuickWorks 9.6, designers achieve the lowest possible power consumption at the highest performance for their programmable logic design."
QuickWorks V9.7tools have also been extended to support a new design flow interface. This easy-to-use graphical interface lets designers access the integrated tools of QuickWorks without having to navigate menus or toolbars. The graphical interface affords CPLD and FPGA designers new to the QuickLogic design tools an intuitive dashboard for developing and optimizing their designs with QuickLogic devices.
QuickWorks V9.7 includes an ASSP Fabric Interface Wizard that automatically generates the Verilog or VHDL between the internal interface of Embedded Standard Products (ESPs) and the designer's FPGA design. This Wizard was designed to simplify the design flow and accelerate time-to-market for users of ESPs.
Pricing and Availability
The basic QuickWorks V9.7tool is available at no cost for Windows 98, 2000, ME, XP and NT. The software can be downloaded from the QuickLogic website.
QuickLogic provides a complete design environment for Field Programmable Gate Array (FPGA) and Embedded Standard Product (ESP) designs. QuickLogic Development Software helps you increase productivity, shorten design cycles, achieve design Performance and Power requirements quickly and efficiently. QuickLogic provides tools to guide you from Concept to Silicon.
QuickWorks® supports Windows, Sun Solaris and Linux based operating systems and provides a comprehensive design environment ranging from schematic and HDL-base design entry, HDL language editors and tutorials, logic synthesis, place and route, timing analysis, and simulation support. QuickLogic has partnered with Synplicty and Aldec to provide industry leading Synthesis and Simulation tools, as well as provide an interface to other industry standard EDA tools.
In addition, QuickLogic provides various Reference Design Kits and Software Development Kits to shorten your verification cycles.
حمل من المرفقات
لاتنسونا من دعائكم المستجاب ان شاء الله
